Comfort | "Airlock" Barrier.
Quality Assured & Test By
At the core of every AirPop Filter is a layer of permanently electrostatically charged filter media which in independent lab testing demonstrated >97% filtration efficiency of <0.3 micron airborne particles such as pollen, pet dander, allergens, dirt, environmental air pollution and other airborne particulate matter.
Our innovative 3D Dome design is engineered for ideal air exchange, reduced CO2 accumulation and allows for natural, easy breathing.
This also prevents the mask from collapsing onto the lips/cheeks which makes speech difficult and can exacerbate skin/lip irritation.
The flexible membranes increase surface area contact with you face for optimal sealing.
The outer membrane can be flipped outwards to adjust the seal and accommodate larger face sizes.
Made from medical-grade, 100% latex free material it’s both hygienic and comfortable.
Snap to Fit Filter
Our self-registering snap in design aligns the filter and with a firm press it’s in the correct position for secure replacement.
The ultra soft material and low profile ensure there’s no unwanted skin abrasion.
Raw Material - Filter
Inner Layer: Spun-bond non-woven polypropylene
Middle Layer 1: Melt blown electrostatic nonwoven
Middle Layer 2: Pre-filter, polypropylene
Outer Layer: Spun-bond poly nonwoven polypropylene
Shelf Life: 3 years from Date of Manufacturer (Batch No)
4 x Filter Inserts
This mask is not a medical device within the scope of Directive 93/42/CEE or Regulation EU/2017/745 (surgical masks) nor is it personal protective equipment
in the sense of Regulation EU/2016/425 (respiratory protective devices EN149:2001 FFP2).Always check that the mask is correctly fitted and covers the nose, mouth, and chin. It is recommended that this mask be worn on bare skin; beards can reduce the filtration efficiency to below the limits set out
AirPop facemasks are not suitable for children under 3 years of age.
It is recommended that children between 3 and 12 years are supervised while
wearing the any face covering.
MEETS ASTM F3502-21, SPECIFICATION ON BARRIER FACE COVERINGS.
THIS PRODUCT IS PRIMARILY INTENDED AS A MEANS OF SOURCE CONTROL FOR MINIMIZING THE PROJECTION OF THE EXPELLED MATERIALS FROM THE WEARER’S NOSE AND MOUTH.
THIS FACE BARRIER COVERING IS NOT A MEDICAL FACE MASK AS DEFINED IN ASTM F2100,
IS NOT INTENDED FOR USE IN MEDICAL PROCEDURES, AND IS NOT A RESPIRATOR.